RUBBER
Super Red
Super Red is a an excellent abrasion resistant rubber for use
as tank linings, chute linings or shot blast curtains.
Temperature - Recommended maximum - 80° C
Pressure - Recommended maximum - 600 kPa
Typical Properties:
Tensile Strength - 11.8 MNIM2
Compression Set - 32.5%
Hardness (IRHD) - 40 ± 5
Elongation at break - 805%
Specific Gravity - 1.03
Aged tensile strength - 131 % of original
Aged elongation at break - 96% of original
Available in roLls 1.2 metres --50 mm -0mm wide or cut to size arid approximately 10 metres long.
|
THICKNESS - mm
|
LIMITS
|
|
|
Lower
|
Upper
|
|
| 1.5 3 4.5 6 10 12.5 |
1.2 2.6 4.1 5.4 9 11.3 |
1.8 3.4 4.9 6.6 11 13.7 |
Chloro Butyl
Chloro Butyl is a high quality black synthetic rubber sheeting. Chioro Butyl has good ozone, ultra-violet and high temperature resistance. Suitable for a wide range of chemical applications and gas installations.
Temperature - Recommended maximum - 1300 C
Pressure Recommended maximum - 1000 kPa
Typical Properties
Tensile Strength - 128 MN/rn2
Compression Set - 12.8%
Hardness(IRHD) - 60 ±5
Elongation at break - 565%
Specific Gravity - 1.15
Aged tensile strength - 107% of original
Aged elongation at break - 75% of original
Available in rolls 1 .2 metres +50 mm -0mm wide or cut to size and approximately 0 metres long
|
THICKNESS - mm
|
LIMITS
|
|
|
Lower
|
Upper
|
|
| 1.5 3 6 |
1.2 2.6 5.4 |
1.8 3.4 6.6 |
Gum Rubber
Gum Rubber is a high quality natural rubber with excellent abrasion
resistance. Used for flange gaskets for fibre glass or thin Steel flange with
low bolt torque. Scraper blades and skirt rubber, strips, curtains, mats, sleeves
and linings.
Temperature - Recommended maximum - 80°C
Pressure - Recommended maximum - 600kPa
Typical Properties
Tensile Strength - 16 MN/rn2
Compression Set - 28.8%
Hardness (IRHD) - 40 ± 5
Elongation at break - 660%
Specific Gravity - 1.02
Recommended maximum - 600 kPa
Aged tensile strength - 104% of original
Aged elongation at break - 91% of original
Available in rolls 1.2 metres +50mm -0mm wide or cut to size and approximately 10 metres long.
|
THICKNESS - mm
|
LIMITS
|
|
|
Lower
|
Upper
|
|
| 1.5 3 4.5 6 |
1.2 2.6 4.1 5.4 |
1.8 3.4 4.9 6.6 |
EPDM
EDPM is a black general purpose sheeting. Good ozone and ultra-violet rubber resistance for external use. EPDM is able to withstand greater temperatures than
GP 60 and a wide range of chemicals.
Temperature - Recommended maximum - 1200 C
Pressure - Recommended Maximum - 1000 kPa
Typical properties
Tensile Strength - 5.34MN/m2
Compression Set - 40%
Hardness (IRHD) - 70 ± 5
Elongation at break - 535%
Specific Gravity - 1.3
Aged tensile strength - 111 .18% of original
Aged elongation at break - 83.5% of original
Available in rolls 1.2 metres +50 mm -0mm wide or cut to size and approximately 10 metres long.
|
THICKNESS - mm
|
LIMITS
|
|
|
Lower
|
Upper
|
|
| 1.5 3 6 |
1.2 2.6 5.4 |
1.8 3.4 6.6 |
GP 6O
GP 60 is a general purpose black natural rubber. Used for flange
gaskets, scraper blades and skirt rubber, strips, curtains, mats, sleeves and
linings.
Temperature - Recommended maximum - 80°C
Pressure - Recommended maximum - 1000 kPa
Typical Properties
Tensile Strength - 4.51 MN/rn2
Compression Set - ± 49%
Hardness (IRHD) - 65 ± 5
Elongation at break - 235%
Specific Gravity - 1.45
Aged tensile strength - 75% of original
Aged elongation at break - 75% of original
Available in rolls 1.2 metres +50 mm -0mm wide or cut to size and approximately 10 metres long.
|
THICKNESS - mm
|
LIMITS
|
|
|
Lower
|
Upper
|
|
| 1.5 3 4.5 6 10 12.5 15 20 25 |
1.2 2.6 4.1 5.4 9 11.3 13.5 18 22.5 |
1.8 3.4 4.9 6.6 11 13.7 16.5 22 27.5 |
GP 4O
GP 40 is a general purpose soft black natural rubber. Used for
flange gaskets for fibre glass or thin low pressure steel flanges. Scraper blades
and skirt rubber, strips, curtains, mats, sleeves and hnings.
Temperature - Recommended maximum - 800 C
Pressure - Recommended maximum - 600 kpa
Typical Properties
Tensile Strergth - 8.85 MNIm2
Compression Set - 25.8%
Hardness (IRHD) - 45 ±5
Elongation at break - 490%
Specific Gravity - 1.20
Aged tensile strength - 99% of original
Aged elongation at break - 85% of original
Availablern rolls 1.2 metres +50 mm -0mm wide or cut to size and approximately 10 metres long.
|
THICKNESS - mm
|
LIMITS
|
|
|
Lower
|
Upper
|
|
| 1.5 3 4.5 6 10 12.5 15 20 25 |
1.2 2.6 4.1 5.4 9 11.3 13.5 18 22.5 |
1.8 3.4 4.9 6.6 11 13.7 16.5 22 27.5 |
GENERAL PROPERTIES AND APPLICATION::. Nitrile Rubber is a black synthetic rubber sheeting. Nitrile is used as asteel against oils,fuels and heat applications.
TEMPERATURE RECOMMENDED MAXIMUM 130C
PRESSURE RECOMMENDED 1000KPA
| Tensile strength | 6,7MN/N5 |
| Compression set | 30% |
| Hardness(A) | 60+-5 |
| Elongation at break | 315% |
| Specific Gravity | 1.15 |
| Aged tensile strength | 111.4% of original |
| Aged elongation at break | 66.7% of original |
Available in rolls- 1,2 meters wide or cut to size Thickness range: 1.5mm,3mm,6mm
GENERAL PROPERTIES AND APPLICATION::. Red Neoprene Rubber is a general purpose neoprene sheeting.A good temperature, oil and a wide range of chemical resistance for use as flange gaskets,scraper curtains mats, sleeves and linings
TEMPERATURE RECOMMENDED MAXIMUM 110C
PRESSURE RECOMMENDED 1000KPA
| Tensile strength | 4,6MN/M2 |
| Compression set | 60.8% |
| Hardness(A) | 65+-5 |
| Elongation at break | 565% |
| Specific Gravity | 1.54 |
| Aged tensile strength | 91% of original |
| Aged elongation at break | 88% of original |
Available in rolls- 1,2 meters wide and approximately 10 meters long,or cut to size Thickness range:0.8mm:1.5mm:3mm:4.5mm:6mm:10mm:12.5mm:15mm:20mm.
GENERAL PROPERTIES AND APPLICATION::. Insertion is a fabric reinforced black natural rubber sheet Extensively used for flange gaskets,strips,curtains, mud flaps and mats
TEMPERATURE RECOMMENDED MAXIMUM 80C
PRESSURE RECOMMENDED 1600KPA
| Tensile strength | 3,6MN/M2 |
| Compression set | 40.3% |
| Hardness(A) | 70+-5 |
| Elongation at break | 260% |
| Specific Gravity | 1.44 |
| Aged tensile strength | 98.6% of original |
| Aged elongation at break | 78.8% of original |
Available in rolls- 1,2 meters wide and approximately 10meters long, or cut to size
| Thickness | Lower Limit | Upper limit |
| 1mm | 0.8mm | 1.2mm |
| 1.5mm | 1.2mm | 1.8mm |
| 3mm | 2.6mm | 3.4mm |
| 4.5mm | 4.1mm | 4.9mm |
| 6mm | 5.4mm | 6.6mm |
| PRODUCTS | PROJECTS | TECH SPECS | PROFILE | MANUFAC | CONTACT US |