Technical Data Sheet - Flexoid
General Properties and Applications:
Premium quality cellulose fibre impregnated with a glue I glycerine composition
Colour
Manila
Printed
Black
Specification compliance
ASTM D1170: P3313B
ASTM F104: F326128
Typical original properties (0.8 mm thickness material)
Maximum operation conditions
| Temperature Pressure Minimum tensile strength Specific gravity Compressibility Recovery |
120°C 8 bar 16 N/mm² 0.7 ASTM F36 A ASTM F36 A |
250°F 120 psi 2300 psi - 25% 40% |
Typical properties after fluid immersion
Weight increase
| ASTM Oil 3 ASTM Fuel B Water |
24 hours 20° C 24 hours20°C 24 hours 20° C |
15% 15% 80% |
Thickness increase
| ASTM Oil 3 ASTM Fuel B Water |
24 Hours 20° C 24 hours 20° C 24 hours 20° C |
1% 1% 16% |
Thickness: mm - 0.25 - 0.4 - 0.8 - 1.5 - 3
tolerance from -5% to 10%
Due to the wide variety of possible installation and operating
conditions the behavior of the rnalehal cannot be guaranteed. While utmost
care has been used in compiling this brochure it must only be used as a general
guide.
This specification is subject to change without notice.
If in doubt, our staff will be please to assist you in finding the optimum sealing
solutions
| PRODUCTS | PROJECTS |
TECH SPECS | PROFILE
| MANUFAC | CONTACT US |